TGAP-6620-M12 Series

Industrial EN50155 Dual RF in IEEE 802.11 a/b/g/n Wireless AP with 2x10/100/1000Base-T(X), M12 connector

           

Overview

TGAP-6620-M12 is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and dual RF in IEEE 802.11 a/b/g/n wireless modules. It can be configured to operate in Dual AP/Dual Client /Bridge /AP-Client Mode. In combination with its IP-40 design and the superb management functionality, TGAP-6620-M12 provides a dust-tight connection and reverse SMA-type connectors, that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TGAP-6620-M12 by WEB interface via LAN port or WLAN interface. TGAP-6620-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. In addition, TGAP-6620+-M12 also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, TGAP-6620-M12 is one of the best communication solutions for wireless applications.

Features

  • High Speed Air Connectivity: WLAN interface support up to 300 Mbps link speed
  • Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
  • Dual Gigabit Ethernet ports support switch mode in M12 connector (A-coding)
  • Support X-Roaming < 60 ms
  • Support wireless load balance
  • Support Multiple-SSID to 4 SSID
  • Support external SMA antenna installation
  • Support dual AP/Dual Client /Bridge /AP-Client Mode
  • Support MAC Filter
  • Wireless connecting status monitoring
  • 1KV isolation for PoE P.D. port for TGAP-6620+-M12 • Secured Management by HTTPS
  • Event Warning by Syslog, Email, SNMP Trap, and Relay output
  • Rigid IP-40 housing design
  • Wall-mount enabled

Download