RGS-7244GP-E

Industrial 28-port rack mount managed Gigabit Ethernet switch with 24x10/100/1000Base-T(X) and 4x1000Base-X, SFP socket

        

Overview

RGS-7244GP series are the managed redundant ring Ethernet switches with 24x10/100/1000Base-(TX) ports and 4x1000Base-X SFP ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP/RSTP/STP (IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. ORing’s thunder switch series provide advanced IP-based bandwidth management which can limit the maximum bandwidth for each IP device. User can configure IP camera and NVR with more bandwidth and limit other device bandwidth. ORing’s Thunder Series Ethernet switches also support application-based QoS. Application-based QoS can set highest priority for data stream according to TCP/UDP port number. ORing’s special Device Binding function can permit only allowed IP address with MAC address to access the networking. Hacker cannot access the IP surveillance network without permission. It can avoid hacker from stealing video privacy data and attacking IP camera, NVR and controllers. ORing’s thunder series switch also provided advanced DOS/DDOS auto prevention. If there is any IP flow become big in short time, ORing’s thunder switch will lock the source IP address for certain time to prevent the attack. It is hardware-based prevention so it can prevent DDOS attack immediately and completely. And all functions of RGS-7244GP can also be managed centralized and convenient by Open-Vision v3.0, Except the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Gigabit Fiber Ethernet application.

Features

  • Support 24x10/100/1000Base-T(X) and 4x1000Base-X SFP ports
  • Support Jumbo frame up to 9.6K Bytes
  • Supports O-Ring (recovery time < 30ms over 250 units of connection), MSTP/RSTP/STP (IEEE 802.1s/w/D) for Ethernet Redundancy
  • Open-Ring support the other vendor’s ring technology in open architecture
  • O-Chain allow multiple redundant network rings
  • Support standard IEC 62439-2 MRP (Media Redundancy Protocol) function
  • Provide Fast recovery technology for Ethernet multi-redundancy
  • Supports IPV6 new internet protocol version
  • Supports IP-based bandwidth management
  • Supports application-based QoS management
  • Supports Device Binding security function
  • Supports DOS/DDOS auto prevention
  • IGMP v2/v3 (IGMP snooping support) for filtering multicast traffic
  • Supports SNMP v1/v2c/v3, RMON and 802.1Q VLAN Network Management
  • Support ACL, 802.1x User Authentication for security
  • Multiple notification for warning of unexpected event
  • Windows utility (Open-Vision v3.0) support centralized management and configurable by Web-based interface, Telnet and Console (CLI)
  • Support LLDP Protocol
  • Event notification through Syslog, Email, SNMP trap, and Relay Output (for –E module)
  • 19 inches rack mountable design

Download