TS-24PFX-4 24 Channel Mixer with DSP Effector and 4 Groups
Feature
- 18 gold-plated XLR microphone inputs and balanced line inputs.* 6 stereo TRS balanced input interfaces.
- Ultra-low noise preamplifier and +48V phantom power.
- Extremely high space provides a wider dynamic range.
- All input channels are equipped with mute, SOLO function, overload LED & low cut filter
- MIC channel with low cut filter and stage.
- Each channel has 6AUX transmission, with AUX1-2/AUX3-4/AUX5-6 and PRE/POS switchable faders.
- Microphone channel IF supports 3-band EQ adjustment.
- Stereo channel has 4-band EQ.
- With SUB1-2, SUB3-4, MAINL-R and center signal distribution switch.
- 100mm high precision fader.
- Each channel is equipped with a plug-in interface and a direct output interface, a main plug-in interface for flexible connection to external devices.
- (SUB1-SUB2)(SUB3-SUB4)|(L-R) (center) A&B matrix.
- Control room or mobile devices.
- 2-TRACK IN can be distributed to the main microphone, control room/headphone output.
- Fully assignable intercom system.
- With USB port, support recording SUB1-2 or main output, and transmitting to CH23-24 system bus for playback.
- 100 options of DSP effects.
Specification:
| Model | TS-24PFX-4 |
| Input | |
| Input impedance | Mic 2kohm balancedLine 10kohm balanced |
| Input gain | Mic continuous variable: 0dB to +50dBLine-mono continuous variable: -15dB to +35dBLine-stereo continuous variable: -20dB to +20bB |
| Maximum input level | Mic +22dBuLine – (mono) + 22dBuLine – (stereo) + 22dBu |
| Interface transmission impedance | 120ohm unbalanced |
| Interface transmission level / maximum | -10dBu/+22dBu |
| Loop impedance | 10kohm unbalanced |
| Interface loop level / maximum | -10dBu/+22dBu |
| CMR at 1 kHz Line (20Hz-20kHz) | >60dB |
| Frequency response | Mixing to mixing 20Hz-20kHz +/-3dB |
| SNR (20Hz-20kHz) | Mic EIN ref.150ohms-117dBu |
| System noise (20Hz-20kHz) | |
| Summing noise | -90dBu (24-channel routing pull low to fader) |
| Wired mixing noise | -86dBu (24 channel routing to 0dB, pan center) |
| Distortion at 1kHz | Mixing to device interface (+30dB overall gain, +20dBu output) <0.009%Mixing to device interface (+30dB overall gain, +20dBu output) wavelength 0.03% |
| Crosstalk at 1 kHz | Channel to channel >-80dBMixing to mixing >-80dBChannel to mixing >-80dB |
| Fader attenuation | >100dB |
| Output (rated signal level mic-50dBu to 0dBu-Line 0dBu) | |
| Output channel | 14 outputs (4 groups, 6.5 single-plug interface output; 6 auxiliary, 6.5 single-plug interface output; 1 stereo monitor, 6.5 single-plug interface output; 1 stereo RCA output port; 1 stereo main output XLR/6.5 single plug interface; 1 channel center audio output/6.5 single plug interface.) |
| Output impedance | All line outputs are 120ohm unbalanced |
| Interface transmission impedance | 120ohm unbalanced |
| Interface transmission level / maximum | +22dBu |
| Interface loop impedance | 10kohm imbalanced |
| Interface loop level / maximum | +22dBu |
| Maximum output level at XLR main output | +28dBu |
| All outputs on 1/4″ plug | +22dBu |
| Headphone | +22dBu/600ohm |
| Main mixing section | |
| Treble slope | +/-15dB @ 12kHz |
| Alto-treble signal bell (stereo) | +/-12dB @ 3kHz |
| Alto-treble signal bell (single) | +/-12dB frequency range 100Hz-80kHz |
| Alto-bass signal bell (stereo) | +/-12dB @ 500Hz |
| Bass signal bell (stereo) | +/-15dB @ 80Hz |
| High pass filter slope | -18dB/Oct. @ 75Hz |
| Power supply | 100-240V-50/60Hz |
| Net weight | 19.42kg |