VA-6200MA Voice Alarm Controller

Feature

  • * Built-in 500W amplifier, integrated 8 zones A + B independent dual speaker loop partition output, the partition has a separate LED indicator, a separate output control button and volume adjustment.
  • * Audio processing with 6 general audio inputs, it can connect with an external user microphone, CD player, radio and other audio signals, and can be achieved in any partition to play any audio source.
  • * The local emergency PTT microphone input (remote microphone, emergency voice), allowing users to freely change the audio output priority according to the actual situation, to configure audio input priority through the system control software.
  • * With an external backup power amplifier input, when the built-in amplifier is failed, it can automatically switch to the backup amplifier.
  • * Support automatically monitoring the working condition of the each zone speaker loop (open circuit, short circuit).
  • * 8-channel trigger input and output interface, it can trigger the pre-programmed language information to the specified partition or (trigger) corresponding to the external power supply to achieve the corresponding event warning.
  • * It is integrated independent EVAC voice information player.* Remote MIC online interface, it can be connected to a remote microphone. The paging station connection using standard RJ-45 network port and CAT-5 network cable, paging transmission can be used to transmit long-distance transmission;
  • * With controller connection interface, it can be connected to the expansion machine. The connection uses the standard RJ-45 network port and CAT-5 cable transmission
  • * With a TCP / IP communication interface to support the basic Window platform visual interface operation, the state automatically synchronized.
  • * Support 24V DC power supply.* With the monitor function of power amplifier.
  • * Built-in recording function, no need external equipment.
  • * With system failure, emergency dry contact output, emergency reset dry contact input.
  • * The partition output with three-wired, four-wired relay function.
  • * With one IP address reset port.

Specifications:

ModelVA-6200MA
Power output500W
Output voltage100V
MIC1-2 input distortion<1% (rated output power), 1KHz
MIC1-2 input frequency response80Hz~20KHz
MIC1-2 input sensitivity5mV/6/600Ω
MIC1-2 input SNR>65dB
AUX3-6 input distortion<1% (rated output power), 1KHz
AUX3-6 input frequency response80Hz~20KHz
AUX3-6 input sensitivity350mV/10kΩ
AUX3-6 Input SNR>70dB
Emergency microphoneEmergency microphone
Sensitivity10mV
Impedance600Ω
Standby amplifier input100V
Standby amplifier audio output1V
Alarm input8 channel
Alarm Output8 channel
Partition output8 channel
24V relay output8 channel
Short circuit modeNo voltage, short connection
Cooling methodAir-cooled
Protection modeDelay / over temperature / short circuit / overload
Output volume adjustment6
Built-in MP3 capacity8G
FormatMP3
Slave Controller CommunicationRS485 bus
Slave ControllerSupport 19 slave controllers
Remote MIC communicationCAN bus
Remote MICSupports 20 remote MIC
Supply voltage~ 220V-240V, 50/60Hz
Maximum current3A
Fuse specifications250V / 5A, slow type
Standby voltage24V DC, ±20%
Maximum current30A
Maximum power consumption600W
Dimension (L x W x D)484 x 88 x 353mm
weightAbout 10.8kg